Wii Remote Won’t Turn On
My Wii Remote won’t turn on no matter how many times I try. I’ve tried holding down the power button, plugging it into the wall, and even replacing the battery. What could be the problem?
How To Fix Wii Remote Not Turning On | Wiimote Fix
[ytvideo]
Troubleshooting a Wii Remote That Won’t Turn On
If your Wii Remote won’t turn on, there are a few things you can check to see if the problem is with the Wii Remote itself, or with your Wii system.
- Make sure you’re using the correct power source – The Wii Remote needs 3.6V battery power to work, and your Wii system will provide the power it needs to control the Wii Remote. If the Wii Remote won’t turn on when you plug it into the Wii system, try using a different power source, like a wall outlet or a USB port on your computer.
- Try resetting the Wii Remote – If the Wii Remote won’t turn on even when you use the correct power source and try resetting it, it might be time to replace it. Resetting the Wii Remote means turning it off and on again several times until the light on the front blinks blue once. If the Wii Remote still won’t turn on, it might be time to replace it.
- Make sure your Wii Remote is charged – The Wii Remote will lose power over time, and will need to be recharged in order to work. If the Wii Remote won’t turn on even when it’s fully charged, it might be time to replace it.
- Make sure your Wii Remote is connected to your Wii system – If the Wii Remote won’t turn on even when it’s connected to your Wii system, it might be time to replace it. If the Wii
Checking the Batteries
It’s possible that the Wii remote just needs new batteries. Swap them out and give it a try! If that doesn’t work, then there may be something wrong with the remote itself. If that’s the case, you’ll need to take it in to be fixed.
Checking for a Loose Connection
First and foremost, if your Wii Remote is not turning on at all, it is likely that there is a loose connection between the Wii Remote and the Wii. To test this, hold down the power button on the Wii Remote for a few seconds, and then try turning it on. If the Wii Remote turns on, then the loose connection is most likely the culprit. If the Wii Remote still won’t turn on, it may be due to a malfunction in the Wii Remote’s power supply or it may be due to a damaged cable. In either case, you’ll need to take your Wii Remote to a service technician to have it checked out.
Checking the Sensor Bar
Problem:
The Wii remote won’t turn on!
If you’re having trouble turning on your Wii remote, there’s a good chance that the sensor bar is not working. To test this, first try pressing the power button to see if it turns on. If it doesn’t, you may need to replace the sensor bar.
To replace the sensor bar, first remove the cover by gently pressing on the sides and lifting it up. Inside you’ll find four screws that hold the sensor bar in place. Once the cover is off, remove the four screws and remove the sensor bar. Be sure to note the orientation of the sensor bar when you replaced it, as you will need to reattach it in the same way.
If the sensor bar is not the problem, then you may need to replace the Wii remote battery. To do this, first remove the battery cover by gently pressing on the sides and lifting it up. Under the cover are two screws that hold the battery in place. Once the cover is off, remove the two screws and remove the battery. Replace the battery with the same type and make sure the contacts are connected.
If none of these solutions work, then you may need to replace the Wii console.
Performing a System Update
There are a few things you can try if you’re having trouble turning your Wii remote on.
- Make sure the batteries are fresh.
- Try a different outlet.
- Try pressing the power button a few times before trying to turn the Wii on.
- Try a different Wii remote.
Restarting the Wii Console
There are a few different things you can try if your Wii remote won’t turn on. If the Wii remote has been dropped or if there is something blocking the sensor, you may need to reset the Wii console.
To restart the Wii console:
- Press the power button on the Wii console to turn it off.
- Hold down the power button and the reset button at the same time for about 10 seconds, until the console beeps.
- Release the power button and the reset button.
- Wait for the Wii console to boot up.
If the Wii remote still doesn’t work, you may need to replace the sensor.
Conclusion
If your Wii remote won’t turn on, there might be a problem with the battery or the power cord. If the battery is dead, you’ll need to replace it. If the power cord is plugged in but the remote still won’t turn on, there might be a problem with the remote’s electronics.